ACU-RITE 200S READOUTS Manuale Utente Scaricare il pdf (Pagina 53)

200S 39

I - 4 Turning Specific Operations

 Press the DOWN arrow key to advance to the Z axis.

 Touch the workpiece surface at point 2.

 Enter the position of the tool tip (Z= 0) for the Z coordinate of

the datum.

 Press ENTER.

Setting Datums using LOCK AXIS Function

The LOCK AXIS function is useful for setting a datum when a tool is

under load and the diameter of the workpiece is not known.

To use the LOCK AXIS function:

 Press the DATUM soft key. The cursor will be in the DATUM

NUMBER field.

 Enter the datum number and press the DOWN arrow key to go to

the X axis field.

 Turn a diameter in the X axis.

 Press the LOCK AXIS soft key while the tool is still cutting.

 Retract from the current position.

 Turn the spindle off and measure the workpiece diameter.

 Enter the measured diameter, for example, 1.5” and press ENTER.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 81 82

Nessun commento

ACU-RITE 200S READOUTS Manuale Utente Pagina 53