ACU-RITE 200S READOUTS Manuale Utente Scaricare il pdf (Pagina 38)

24 I

I - 3 Milling Specific Operations

Preparation:

 Select the tool with the appropriate tool data.

 Pre-position the tool to an appropriate location (such as X = Y = -1”).

 Move the tool to milling depth.

 Pressthe PRESET soft key.

 Press the Y axis key

-ALTERNATIVE METHOD -

 Press the SET/ZERO soft key so that you are in Set mode.

 Press the Y axis key.

 Enter nominal position value for corner point 1: Y = 1”, and select

tool radius compensation R + with R+/- soft key. Press until R+ is

shown next to axis form.

 Press ENTER.

 Traverse the Y axis until the display value is zero. The square in the

near zero warning is now centered between the two

triangular marks.

 Press the PRESET soft key.

 Press the X axis key.

-ALTERNATIVE METHOD -

 Press the SET/ZERO soft key so that you are in Set mode.

 Press the X axis key.

 Enter nominal position value for corner point 2: X = 1.5” select tool

radius compensation R - with R+/- soft key. Press twice until R- is

shown next to axis form.

 Press ENTER.

 Traverse the X axis until the display value is zero. The square in the

near zero warning is now centered between the two

triangular marks.

 Presets can be entered in the same manner for corners 3, and 4.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 81 82

Nessun commento

ACU-RITE 200S READOUTS Manuale Utente Pagina 38